Shenzhen Jetacon Technology Ltd
Shenzhen Jetacon Technology Ltd
Add to Cart
Description:
Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset
1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step!
Adjustable drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors
Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment
On board current switching - Power output can be set according to specific user requirement
Full closed-type optical isolation to protect the user\'s computer and equipment
Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)
4 channel inputs interface- Can be used for XYZ limit and emergency stop
Professional design - Two stage signal processing with super anti-jamming
Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect
Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop
Universal architecture - Supports most parallel software MACH3, KCAM4, EMC2 etc!
Board size:18.5x14x4cm(approx)
Cable length: 130cm(approx)
-
Dip settings:
| Current Setting | 1 | 2 | Decay Mode Settings | 3 | 4 | MicroStep Settings | 5 | 6 |
| 100% | ON | ON | FAST | ON | ON | 1 | ON | ON |
| 75% | OFF | ON | 25% | ON | OFF | 1/2 | ON | OFF |
| 50% | ON | OFF | 50% | OFF | ON | 1/8 | OFF | OFF |
| 25% | OFF | OFF | SLOW | OFF | OFF | 1/16 | OFF | ON |
-
Package includes:
CNC TB6560 4 Axis Stepper Motor Driver Controller Board x 1
Cable x 1
CD x 1
